Troy Defense M5 9mm Carbine

[Review] Troy Industries A4 “Other Firearm”

I have always been fascinated by the idea of a carbine that shoots pistol-caliber ammo. This is not a new idea — pistol caliber carbines have been around since the days of the Wild West. So, it would come as no surprise that I requested a 9mm firearm from Troy Industries. They sent me their A4 firearm to test. This is a special gun that is distributed by their Tech Ops department. This firearm sometimes finds itself in the hands of special operators, whether law enforcement or military. That just makes it more interesting to me.

Advantages Of A Pistol-Caliber Carbine

There are a few advantages of owning a pistol-caliber carbine (PCC). They include:

Ammunition Sharing. You buy one cartridge for two guns. From 1873 to now, it still works that way.

Easy-Handling. The PCC is usually shorter than a full-blown rifle. This makes it a good truck or home-defense gun. As an example of that handiness, the Ruger’s pistol caliber carbine’s take-down feature makes it downright easy to take along with you.

Velocity Gain. OK, so some 9mm/40 S&W/.45 ACP rounds are designed to work best in short-barreled pistols, but there are some rounds out there that will gain anywhere from 200-400 fps or more in velocity out of the longer PCC barrel. No generalizations can be made, but you should be able to find a load that makes it worthwhile to shoot in the longer PCC barrel.

Extended Range. If you are looking to extend the range a bit of your favorite pistol round in a PCC, you just might do that. Now…please remember that we are talking pistol rounds here, not rifle. Any gain in range would be moderate. I can think of one example, however, that might be worth some range/velocity experimentation…the .40 S&W. Sure, you can buy a 10mm PCC but if you already own a .40 pistol, it makes sense to go that way. You just might find a load that will produce 10mm-style velocities. In my state, both calibers are deer-legal…I’d just rather have the 10mm velocities out of whatever gun I’m shooting and the PCC may help achieve that. That in itself might extend your effective range an extra 50 or more yards.

.44-40 ammo
.44-40 Winchester

PCC History

The Winchester 1873, “The Gun that won the West”, was wildly popular in its day and has spawned many reproductions over its 146-year history. The 1873 was originally chambered in .44-40 (.44-40 Winchester), with other calibers added later. It was so popular that it was produced until 1923 and continues to be made today in reproductions.

Winchester 1873
Winchester 1873 (original)

In 1877, Colt started producing the “Colt Frontier” or “Frontier Six-Shooter” in .44-40 in an effort to capitalize on the 1873 rifle market. It was basically a Single-Action Army in a different caliber than the original SAA’s .45 Colt. Both guns shared the same ammo, a great convenience in terms of packing ammo around for both a rifle and a handgun. Two guns sharing one caliber meant that ammo was fairly easy to find due to increased popularity and that the cowboy’s saddle bag loading strategy just had to deal with one size of ammo box. This move was very well received…in fact, the two mounted participants in the gunfight at the O.K. Corral were armed with this combination of guns in .44-40.

Colt Frontier .44-40
Frontier Six-Shooter (1907)

So, the idea of a 9mm carbine or rifle that shoots the same ammo as your handgun shoots is not a new one but has really come into its own in recent years.

The Ruger Pistol Caliber Carbine

Probably one of the more popular PCC today is the one introduced fairly recently by Ruger. This 9mm carbine comes in a take-down version, which adds to its versatility. It has sold very well since its introduction in late 2017.

Ruger PCC
Ruger 9mm PCC

One of the selling points of this gun is its ability to use Glock magazines out of the box. So, you don’t have to own a Ruger centerfire autoloading pistol to have a magazine that works with this gun — they have seen to it that not only is the guns’ caliber compatible with Glock 9mm pistols, but the magazines are compatible as well due to interchangeable mag wells. A smart move, given how many own some form of Glock 9mm or other. This carbine is available with a fluted, threaded barrel, “tactical” forend, and other customizations. Six new models, including guns chambered in .40 S&W were introduced in April, 2019.

The Ruger 99/44 Deerstalker was another pretty popular PCC. This was a rotating-bolt, gas piston action carbine chambered in .44 Magnum that was made from 1961 until 1985, when production was stopped due to high production costs. It has been described as a 10/22 on steroids. It was brought back to life from 2000 to 2006 as the Deerfield.

Ruger deerfield
Ruger 99/44 Deerstalker/Deerfield

This would have made a perfect deer gun for my neck of the woods…relatively close-range shots. I’ve killed several deer with my S&W 629 with an 8 3/8″ barrel…it would certainly help if the barrel was 18 and a half inches, like the Deerfields’ tube.

BONUS OFFER: Get your free shooting range targets to print at home!

Get your free targets to print at home!

Subscribe to our newsletter and get gun deals, educational content, hand's on reviews and news on law changes!

We see that PCC guns were, and are, popular. From 1873 to the present, the PCC has proven its worth and is a steady seller. Whether you hunt, compete, plink or defend your home, these guns just make sense. The PCC has come around full circle to today’s modern sporting rifle — the AR pattern.

Carbine evolution

The Troy Industries 9mm PCC

OK…we know where the PCC comes from. Now, let’s look at the modern iteration of it. Troy Industries is located in West Springfield, Massachusetts and makes, among other products, parts for the Smith & Wesson M&P15 AR-style rifle. They also make M14 parts and had their M7A1 rifle looked over by the military reviewers when they were contemplating replacing the M4 carbine. The company knows what it’s doing where rifles and carbines are concerned and has customers from all over the world. This particular gun is sold by Tech Ops International out of New Jersey and is not a rifle or a pistol – it qualifies as an “other” firearm which makes it legal in New Jersey and other states. Here is a bit about the company.

They also make parts — a LOT of parts — for different battle systems. Here’s a partial list of products that they sell outright to the public or are purchased by one of several different firearms-related manufacturers…

  • Back-up sights, fixed and folding
  • Rails and accessories
  • Hand stops
  • Grips
  • Magazines
  • Rail covers
  • Stocks
  • Slings and mounts
  • Muzzle brakes and suppressors
  • Weapon upgrades

And, they build at least 8 rifles and 6 AR-style pistols. They even make a straight-pull bolt action and three pump rifles…yep, pump guns so they can sell guns to people in all 50 states.

The A4: Specs and Pictures

The Troy A4 Other Firearm 9mm was designed to capitalize on two big firearms trends — the AR-platform rifle and the popularity of the 9mm cartridge. It is important to note that this is a firearm with a 13.5-inch barrel, not an AR-style pistol…that really helps in the velocity and sighting departments. Let’s look at some specs:

Total Overall Length:26.5"
Receiver:7075 Forged Aluminum Upper and Lower
Barrel:13.5" Chrome Molly -- 1/7 Twist Rate
Flash Hider:TROY Claymore Muzzle Device
Operating System:Gas Impingement
Gas System:Carbine Length .750 Low-Pro Gas Block
Hand Guard:Troy SOCC Battle Rail 10.5" M-Lok
Sights:Troy M4 Flip Up Low-Pro Front and Rear
Front Grip:Troy Poly CQB VFG
Stabilizing Brace:SB Tactical -- Not Pinned
Grip:Troy Control Grip Mandatory
Bolt Carrier:Standard
Charging Handle:Standard
Small Parts:Mil-Spec
Magazine:Glock 10rd (NJ)
MSRP:$1,399
Troy Industries A4 9mm Carbine right side

As to the price, I could not find a more current price. I reached out to the company and will report when I hear back from them. We see from the above list that the company uses its own accessories in its firearm lineup. I do read good things about Troy sights, stocks, etc. so the buyer gets the best of both worlds.

Troy makes some very nice high-end rifles. I was impressed as I perused their site and as I read older reviews of their 5.56 and 7.62 offerings. They are big into building guns for, and supplying parts to, the military. Here is the “About Us” segment from one of their web pages…it explains things better than I can.

about us

So, it seems that Troy is keeping busy with its Battle Ready Series, accessories and commitments to its global customers.

Let’s look at some more photos of the A4…

Troy Industries A4 9mm Carbine being shot
Troy Industries A4 9mm Carbine being shot

A couple of my sons shooting the A4. It handled exactly as any AR-platform rifle would.

Troy Industries A4 9mm Carbine chamber
Chamber area — note deflector.

It worked. Also, the dust cover is appreciated.

Troy Industries A4 9mm Carbine fore-grip
Fore-grip
Troy Industries A4 9mm Carbine magazine-well
Magazine well.

The 10-round Glock mag that it shipped with is shown partially ejected. You can use whatever Glock mag your state will allow. I would go for the 33-rounder, myself.

Collapsible Stock
Collapsible Stock — two positions, in or out.
Troy Industries A4 9mm Carbine muzzle

The business end, complete with doorbuster flash hider

Sights

The Troy sights included with this firearm were excellent. Push a button in and pull the sights up into position or put them back down as needed. They are both adjustable. Here are some photos of the front sight…

Troy Industries A4 9mm Carbine front sight
Front Sight
Troy Industries A4 9mm Carbine front sight legend
Front Sight
Troy Industries A4 9mm Carbine rear sight
Rear Sight
Troy Industries A4 9mm Carbine rear sight
Rear Sight

The sights are robust. I shot the firearm and had no trouble picking them up, even with my old eyes. If you are used to sights of this type, you will find these very accommodating. If you don’t like them, you could easily get a red dot sight and mount it on the picatinny rail.

BONUS OFFER: Get your free shooting range targets to print at home!

Get your free targets to print at home!

Subscribe to our newsletter and get gun deals, educational content, hand's on reviews and news on law changes!

Shooting The A4

Two of our four sons helped me test the firearm at my backyard range. They enjoyed shooting it. It handled about like any other AR out there, and was fun to shoot.

The gun was more accurate than I am… I’m sure, with a red dot or scope of some sort, I could probably do better in the accuracy department. My glasses don’t allow three focal planes to register at once…front sight/rear sight/target…so I did the best under the circumstances. These targets are my own, with 1-inch squares, a four-inch large box and two-inch smaller white box — you can get an idea of group size quickly. I shot at 25 yards.

The weather is slowly turning to winter in my state, and today was the start. I shot in cool, cloudy, misty weather so I guess I can claim that as an excuse…? Not really. The targets aren’t that bad, but I know I could do better. I shot two different 9mm loads — the Winchester “White Box” 115 grain and the NovX 65-grain practice load. (I am working on a review of the NovX ammo — it is really something else. A 65-grain bullet at ridiculous velocities…see below).

target WWB
Winchester 115 grain
target NovX
NovX 65 grain

Here are the ballistic stats for these two loads out of the A4’s 13.5-inch barrel…

BrandWeight (grains)Velocity (f.p.s.)Energy (ft./lbs.)Standard DeviationExtreme Spread
Winchester11513594711634
NovX6519715602663

As you can see, the velocities are up from those achieved in a 4-inch pistol barrel. By way of comparison, I loaded my Sar K2P 9mm with the Winchester load and achieved an average velocity of 1129 fps. The NovX 65-grainer averaged 1600 fps, as well. It has a 3.8-inch barrel. So, in the A4 we see a pretty impressive gain in velocity over pistol’s shorter barrels.

Here are a couple of observations about shooting the A4:

1. It needs a forward assist — There is nothing other than the bolt release and charging handle that will help the cartridge into the chamber, but once those two items are released and seated, you’re done. I had an issue with the NovX 2-part stainless steel cartridge case…it didn’t want to fully enter the chamber the first time I released the bolt on a full magazine. I re-seated the bolt and all was well, but a forward assist would have made things easier. I guess they figured that a pistol cartridge wouldn’t need a boost to get into the chamber like a 5.56/.223 might. On a positive note, it DOES have a very effective deflector behind the chamber — it directed fired cases way up over the hill and kept them off the shooter. The dust cover is appreciated as well. When I contacted a representative of the company about this, he said he didn’t know but would ask the engineers and pointed out that competing 9mm rifles don’t have a forward assist, either. Point well taken…if I find anything else out, I’ll update my review. It could be that I was the only one to have trouble seating a cartridge in the chamber, but I doubt it. It was no big deal, at any rate.

Troy Industries A4 9mm Carbine no forward assist
No forward assist.

Also note the safe-fire markings for the safety. Sort of a “boom” – “no-boom” type of illustration.

2. Recoil — almost on a par with .223 ammo. That really surprised me. I was expecting a 6-plus-pound rifle to be downright tame with the lowly 9mm but I got a different result. Now, get me — I’m not saying the recoil was a molar-mover…it was just more than I anticipated. In terms of noise, it wasn’t as loud as a .223 and the flash hider did its job well. I included the short video of one of my sons shooting the gun so you could get some visual indication of the recoil. Again, nothing much but a little more than expected.

3. Quality shows — The firearm and all its components are very well built and that is evident. You pick up some AR-type long guns and the charging handle feels flimsy, or the rear sight won’t stay where you put it, or…you get it. This gun is solid. One small example: the magazine release is extended and easy to use…

Troy Industries A4 9mm Carbine external mag-release

To Sum Up…

If you are looking for a long gun in 9mm, give the A4 a try. Check one out at your local dealer. Pick it up, after raising the sights into position. Heft it and put it up to your shoulder with the stock collapsed and then pull the stock out all the way. I think you’ll agree that it feels solid as the rear sight comes up to your eye. Or, better yet, take one home and put a red dot on it. Then, you’ll have a minimum-50-yard gun for pests, varmints or other uses. Whether you use it in an exterminating capacity or just to ventilate tin cans, I think you’ll find the Troy A4 a capable, fun little gun to shoot. The nice part is that it is an AR-style rifle so all those add-ons out there for that platform will work with it. One of the best parts of the whole deal is that if you buy it, you’ll have a lifetime to find something wrong with it — that’s the guarantee that comes with it. If you are an owner of this firearm or just have a comment, add it below for us to read. As always, go shooting and be safe!

Total
2
Shares
18 comments
  1. I’ve been considering a PCC for home defense, but since I live in Calizuela, I cannot buy one (no sales or purchases of scary AR “assault weapons of war” allowed anymore in Calizuela) so I’ll have to build one on a lower I already own. Not only will I consider 9mm, 40 S&W, and 10 mm, but also 3.57 SIG. Why not, though I think 10mm will win easily and I’ll have to re-load anyway. The rest of you have no idea how free you are. I’ll leave when I retire, but it will be a long few years of waiting. And just think: I’ll be able to suppress it in most free states as well since subsonic is fine for home defense.

    1. Daniluska, sorry to hear about your situation there. We are incredibly blessed here in the U.S., but we have to be vigilant. One or two slip-ups and our rights could be really threatened. I agree with you about the 10mm, especially if you reload. That’s an effective combination. Thanks for writing!

      1. Mike, she IS in the US… I assume so, anyway. Calizuela to me means California, which is so leftist that sometimes it comes across communist-esque.. hence Calizuela (California+Venezuela).

        Though some other states aren’t much better, i.e. Je… err New York, where afaik you can only have 8 or 10 rd magazines (I assume that’s why the M-5 was standard sold with 10 rd Glock mags, as Troy prides/prided – if they really can’t sell those in the United Socialist Republic of Calizuela anymore – itself on selling stuff, which is legal in ALL 50 states…

        Calizuela should secede already and be done with it. I am sure no one would bother to fight a civil war again, at least not if it’s them..

        That being said, I cannot find the M5 on the Troy site anymore. Only a M7A1 (which I assume is a newer version, but lacks the rails, vertical grip, etc.).

        Does it only look like it, or is the muzzle brake/muzzle threaded (i.e. ready to mount a suppressor), or am I seeing that wrong?

        1. A.C., Sorry I didn’t get the Calizuela refernce…makes sense now! As for finding the gun on the Troy website, it is distributed by Tech Ops International and is on their website. Look for an edit in the article that reflects that information. I didn’t know that when the article first was published but should have it straightened out now. Thanks for writing!

  2. Mike,
    Thanks for the great review! My personal favorite is my Keltec Sub 2000. A great little gun and one third the price! and folds up nicely too!

    Alanna

    1. Alanna, my good friend Mitch has the Keltec in .40 and really like it. The folding feature is a great, I admit. Thanks for writing!

    2. I also have the Sub2000. Unforetunately, it is not in the same league as the Troy. The Sub2000 is fun but not a real gun platform like the AR. I own both and the Troy kills it hands down.

    1. Cyrus, the 9mm is one of the most popular PCCs out there. I think you could sure do worse for her. If she had one, she’d have two guns that shot the same ammo-a win/win. Thanks for writing!

      1. I am a firm believer in having a pistol and a rifle that shoot the same caliber. 22, 9mm, 357, Having the ability to reach out just a little further and with accuracy.

  3. Thanks, enjoy your blogs… I just cannot get excited with 9mm rifle. I personally want something bigger(more POWER in a rifle), but good article…
    Tom

    1. Tom, first, thanks for the kind words and second, yeah, you’d have to really come to grips with the fact that you bought a pistol-caliber long gun if you buy a 9mm PCC and understand its limitations. If you want more power, probably a full-blown rifle caliber would be a better choice. Thanks for writing!

  4. I own the Troy “OTHER” in 9mm and 5.56. Both are built like tanks and shoot dead on with the iron sights. I have he “MICROSET” M4 sights which I like better than the ones you used. Great review Brother in arms!

  5. Hello Mike thanks for the review. I have an A4 and live in a place we call NJ so they like gold here. I enjoyed your review and agree with you. The only things that I thing should have been on the weapon was a ambidextrous safety. I have have no troubles with a failure to feed or eject a round with the firearm. The problem is with some of the Glock magazine. I was advised to only use glock mags by Troy. It appears that they might feed better then other mags. What’s strange is the firearm came with a Gen 4 mag which did not work. I purchased another one and that did not work. The bolt was not locking back after the last round ejected. I have only been using Glock 19 Gen 5 and have had no further problem. I have a Sig red dot and is very accurate from 25 yards and in.

    1. Todd, interesting about the magazines. You’d think that the ones Troy recommended would work, pretty much all the time. Sounds like you got it figured out, though. Thanks for writing!

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts
Ruger PC Carbine 9mm and ammo
Read More

Ruger PC 9mm Carbine: Complete Review

In this Article: Quick History of the Ruger CompanyOriginsHow It WorksSpecs and PicturesTake-down procedureSome Personal ObservationsRange TimeWrap Up Last time, we looked at a Hi-Point model 995 9mm carbine. This time, we’ll look at the Ruger version of the 9mm carbine (also available in .40 S&W). There are 20 different models listed on Ruger’s website, ... Read more
Ar-15 .224 Valkyrie
Read More

Best .224 Valkyrie Barrels

The .224 Valkyrie is an extraordinary and exciting new cartridge designed that can compete directly with larger, longer-range calibers like the 6.5 Creedmoor. The .224 may be a great round but it’s going to need a great barrel to really stand up to its name. Luckily, we compiled the best .224 Valkyrie barrels in the ... Read more

Talk to me

Hi! I'm Mike, one of the oldest writer of Sniper Country! If you have any feedback or question about my articles, please submit it here, it's always appreciated!

[contact-form-7 404 "Not Found"]

Claim your targets for free (worth $99)!

Join 212,000 avid gun enthusiasts and claim your print-at-home shooting drills. Receive exclusive gun deals once a week and all our great reviews right in your inbox.